168
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
Setting Item Default Value Setting Details
Audio TV Out Off You can enjoy audio through the speakers of the
TV while this unit is on.
"On": When this function is used
"Off": When this function is not used
• This setting is xed to "Auto" if you have set
"Input/Output Assign" - "TV Out/OSD" - "HDMI
Out" or "HDMI" - "HDMI Out" in "AV Adjust" to
"MAIN" or "MAIN+SUB" and "HDMI CEC" is set
to "On". If you change this setting, set "HDMI
CEC" to "Off".
• Listening mode cannot be changed while "Audio
TV Out" is set to "On" and audio is being output
from the TV.
• Depending on your TV or input signal of the
connected device, audio may not be output from
the TV even if this is set to "On". In such a case,
audio is output from the speakers of the unit.
• Audio is output from this unit if you operate the
MASTER VOLUME dial on this unit when audio
that is input to this unit is output from your TV
speakers. If you do not want to output audio,
change the setting of this unit or TV, or reduce
the volume of this unit.
Audio Return
Channel (eARC
supported)
Off You can enjoy the sound of an HDMI-connected
ARC-compatible TV or eARC-compatible TV
through the speakers connected to the unit.
"On": When enjoying the TV sound through the
speakers of this unit
"Off": When the ARC function or eARC function is
not used
PQLS Off Enables high-quality playback of audio from AV
components that support PQLS (Precision Quartz
Lock System) connected by HDMI.
"On": When this function is used
"Off": When this function is not used
Setting Item Default Value Setting Details
Auto Delay On This setting automatically corrects
desynchronization between the video and audio
signals based on the information from the HDMI Lip
Sync-compatible TV.
"On": When enabling the automatic correction
function
"Off": When not using the automatic correction
function
Power Management
Change the settings for the power-save function.
Setting Item Default Value Setting Details
Sleep Timer Off You can allow the unit to enter standby
automatically when the specied time elapses.
Select a value from "30 minutes", "60 minutes" and
"90 minutes".
"Off": The unit does not automatically enter standby
mode.
Auto Standby On/Off This setting allows the unit to enter standby mode
automatically after 20 minutes of inactivity without
any video or audio input. (When "USB Power Out
at Standby" or "Network Standby" is enabled, the
unit enters the HYBRID STANDBY mode which
minimizes the increase in power consumption.)
"On": The unit automatically enters standby mode
("AUTO STBY" lights up).
"Off": The unit does not automatically enter standby
mode.
• "Auto Standby" is displayed on the main unit’s
display and TV screen 30 seconds before
entering standby mode.
• "Auto Standby" does not work when Zone 2/
Zone 3 is active.
• Default values vary depending on the regions.
To Next Page
Loading...
Need help?
General
