Pioneer SC-LX904 User Manual

175
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
 Zone 3
Change the settings for Zone 3.
Setting Item Default Value Setting Details
Output Level Fixed Select whether to adjust the volume on the pre-
main amplier in the separate room or on this
unitwhen outputting to Zone 3.
"Fixed": Adjust on the pre-main amplier in the
separate room
"Variable": Adjust on this unit
Volume Limit Off Set the maximum value for Zone 3 to avoid too
high volume. Select "Off" or a value between
"-32 dB" and "+17 dB".
Power On Level Last Set the Zone 3 volume level of when this unit is
turned on. Select a value from "Last" (volume
before the unit was turned off), "-∞ dB", and
"-81.5 dB" to "+18.0 dB".
• You cannot set a higher value than that of
"Volume Limit".
Bass 0 dB Adjust the volume of the bass for Zone 3. Select a
value between "-10 dB" and "+10 dB".
Treble 0 dB Adjust the volume of the treble for Zone 3. Select a
value between "-10 dB" and "+10 dB".
Balance 0 Set the left-right balance for Zone 3. Select a value
between "L + 10" to "R + 10".
 Remote Play Zone
Change the settings for remote play.
Setting Item Default Value Setting Details
Remote Play
Zone
Auto When playing with AirPlay or Spotify Connect,
or when using the Music Server function to play
remotely from your PC, you can set whether to play
in the main room (where this unit is located) or in a
separate room (ZONE 2/ZONE 3).
"Auto": When the main room input is NET, music
is played in the main room. When the separate
room input is NET and the main room input is other
than NET, then the music is played in the separate
room.
"Main", "Zone 2", "Zone 3": Select when limiting the
play zone to a particular room. For example, when
playing only in the separate room, select "Zone 2"
or "Zone 3".
• This function may not work if playback is already
proceeding with the same network function.

Pioneer SC-LX904 Specifications

General

Brand	Pioneer
Model	SC-LX904
Category	Receiver
Language	English