192
Front Panel≫ Rear Panel≫ Remote≫
Contents
≫
Connections
≫
Playback
≫
Setup
≫
MCACC Data Check
You can check the number of speaker channels connected and the content and
values you have set for each of the speaker settings. Depending on the item, you
can check by changing the MCACC memory or Channel with the cursors.
Speaker Setting
You can check the number of speaker channels connected and the large and
small settings you have set for the low range reproduction capabilities for each of
the speakers.
Channel Level
You can check the output level settings for each of the speakers.
Speaker Distance
You can check the distance from each speaker to the listening position.
Standing Wave
You can check the settings of the standing wave control lter.
Acoustic Calibration EQ
You can check the calibration values for the frequency characteristics of each
speaker that were set in "Manual MCACC".
Group Delay
You can check the group delay of speakers before and after calibration.
Data Management
You can change the name of the MCACC Memory, or copy or delete the settings
you have made.
Memory Rename
Change the name of the MCACC Memory.
Setting Item Default Value Setting Details
M1 Memory 1 You can select a name for the memory from
"Memory 1", "Symmetry", "All Adj", "F.Align",
"Movie", "Music", "Game", "Party", "Sofa", and
"Seat".
M2 Memory 2 You can select a name for the memory from
"Memory 2", "Symmetry", "All Adj", "F.Align",
"Movie", "Music", "Game", "Party", "Sofa", and
"Seat".
M3 Memory 3 You can select a name for the memory from
"Memory 3", "Symmetry", "All Adj", "F.Align",
"Movie", "Music", "Game", "Party", "Sofa", and
"Seat".
MCACC Memory Copy
Copy the speaker settings from a Memory to another Memory. After making the
following settings, press ENTER and follow the on screen instructions.
Setting Item Default Value Setting Details
Copy All Data Select the content you want to copy.
"All Data": Copy all settings.
"Level & Distance": Copy only the output level
and distance from the listening position for each
speaker.
Copy from M1.Memory 1 Select the Memory you want to copy.
Copy to M1.Memory 1 Select the Memory you want to copy to.
To Next Page
Loading...
Need help?
General
