3
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.
3.13
ENGINE INSTALLATION
Use the following procedure to reinstall the engine
assembly.
1. Attach engine with suitable lifting straps to an
overhead or portable engine hoist.
2. Remove the engine stand adapter plate.
3. Use the overhead or portable engine hoist and
suitable engine straps to lower the engine into the
vehicle frame.
NOTICE
Have an assistant help guide the engine in and out of
the vehicle while using an engine hoist to prevent
personal injury or damage to vehicle components.
4. By hand, install the (4) front engine mount bolts and
nuts (Item 1). Do not tighten at this time.
5. Install the four engine to transmission coupler plates
(Item 2) and instal the (8) bolts and washers (Item 3).
Do not tighten fasteners at this time.
NOTICE
DO NOT torque fasteners at this time.
6. Install the Clutch Center Distance Tool (PU-50658 or
PU-50658-A) onto the crankshaft and transmission
input shaft. The pictures below show a properly
installed tool (PU-50658).
NOTICE
Images for Reference only. The tool shown should only
be used to check center to center distance.
The location the tool rests on the shafts may vary.
PU-50658–A
HOLE
YEAR
VEHICLE DESCRIPTION
1 2012 RZR 570
2
2011-14 RZR 900
2014-15 RZR XP 1000
2013 RANGER 900
3
2014-16
ACE
2015-19 ACE 570
2015-16
RGR ETX
2013–19 RZR 570
2014–19 RANGER 500/570
2015-19
RANGER 570 Full-Size
4
2014-19
RANGER 900/1000
ENGINE / COOLING SYSTEM
To Next Page
Loading...
Need help?
General
