11.16
9850043 R01 - 2017-2021 RANGER 500 / 570 Service Manual
© Copyright Polaris Inc.
BODY COMPONENT REMOVAL
LOWER SEAT BASE
1. Lift up on the seat base to disengage the seat from
the rubber grommets
q
.
2. Pull the seat base forward to disengage the rear tabs
and remove the seat base from the vehicle.
FRONT BUMPER
1. Unlatch the hood and disconnect the head lamp
harnesses. Remove the two pivot screws retaining
the hood and remove the hood from the bumper.
2. Remove the three bolts from the lower portion of the
bumper.
3. Remove the two fasteners from each side of the
upper portion of the bumper.
4. Carefully remove the bumper from the vehicle.
FENDERS / FOOT PADS
1. FRONT - Remove the lower T27 Torx-head screws
retaining the foot pads.
2. Remove the two push rivets retaining the front fender
and remove the fender from the vehicle.
3. Repeat this procedure to remove the other front
fender.
4. REAR - Remove the lower T27 Torx-head screws
retaining the foot pads.
5. Remove the three T27 Torx-head screws retaining
the rear panel.
6. Repeat this procedure to remove the other rear
fender.
BODY / FRAME
To Next Page
Loading...
Need help?
General
