Pyronix Matrix 832 Installation Guide

! Matrix 832 / 832+ / 424
RINS428-5 Page 79
8.1.10 Telephone Number 3 Allocation
Enter BXY. Enter a telephone number from [1 - 9] to be used as the 3
rd
telephone number. Press B to
save the new number. An acceptance tone will be played.
8.1.11 Test Dial Sequence (Group Reporting)
Enter BXZ. Enter a dial sequence from [1 - 3]*.
[1]* = test dial to be sent only to telephone number 1
[2]* = test dial to be sent to telephone 1 and telephone 2
[3]* = test dial to be sent to telephone 1 and if no transmission then to telephone 2
Press
B to save the new number. An acceptance tone will be played.
8.1.12 Anti-Code Algorithm Number
Enter BX[. The current code will be displayed. Press 1 digit for the code from [0 – 8], and press B to
accept the changes. An acceptance tone will be heard.
NOTE: Most Pyronix Anti-code generating software will only generate codes for Algorithm 0.
8.2 Reporting Formats
PC Programming Procedure
The PC window below shows how to select the appropriate reporting format, and program telephone
numbers. Once an option has been chosen press the <save> button and proceed to the next window.
NOTE: The system allows the engineer to program up to 9 telephone numbers to which events can be
transmitted. In addition it is possible to allocate a different reporting format to each telephone
number.

Pyronix Matrix 832 Specifications

General

Brand	Pyronix
Model	Matrix 832
Category	Control Panel
Language	English