4 – Managing Switches
Configuring a Switch
59097-02 B 4-23
A
4.7.2.5
Broadcast Support
Broadcast is supported on the switch and allows for TCP/IP support. Broadcast is
implemented using the proposed standard specified in Multi-Switch Broadcast for
FC-SW-3, T11 Presentation Number T11/02-031v0. Fabric Shortest Path First
(FSPF) is used to set up a fabric spanning tree used in transmission of broadcast
frames. Broadcast frames are retransmitted on all ISLs indicated in the spanning
tree and all online N_Ports and NL_Ports. Broadcast zoning is supported with
Access Control List (ACL) hard zones. When a broadcast frame is received, these
hard zones are enforced at the N_Ports and NL_Ports. If the originator of the
broadcast is in a hard zone, the frame is retransmitted on all online N_Ports and
NL_Ports within the hard zone. If the originator of the broadcast frame is not in a
hard zone, the frame is retransmitted on online N_Ports and NL_Ports that are not
in a hard zone. The default setting is disabled.
4.7.2.6
In-band Management
In-band management is the ability to manage switches across inter-switch links
using SANsurfer Switch Manager, SNMP, management server, or the application
programming interface. The switch comes from the factory with in-band
management enabled. If you disable in-band management on a particular switch,
you can no longer communicate with that switch by means other than a direct
Ethernet or serial connection.
To Next Page
Loading...
Need help?
General
