A – Command Line Interface
Ping Command
59097-02 B A-43
A
Ping Command
Initiates an attempt to communicate with another switch over an Ethernet network
and reports the result.
Authority None
Syntax ping [ip_address]
Keywords [ip_address]
The IP address of the switch to query. Broadcast IP addresses, such as
255.255.255.255, are not valid.
Examples The following is an example of a successful Ping command:
SANbox xxxx #> ping 10.20.11.57
Ping command issued. Waiting for response...
SANbox xxxx #>
Response successfully received from 10.20.11.57.
This following is an example of an unsuccessful Ping command:
SANbox xxxx #> ping 10.20.10.100
Ping command issued. Waiting for response...
No response from 10.20.10.100. Unreachable.
To Next Page
Loading...
Need help?
General
