Qlogic SANbox 5600 Series User Manual

A – Command Line Interface
Lip Command
59097-02 B A-41
A
Lip Command
Reinitializes the specified loop port.
Authority Admin session
Syntax lip [port_number]
Keywords [port_number]
The number of the port to be reinitialized. Ports are numbered beginning with 0.
Examples The following is an example of the Lip command:
SANbox xxxx (admin) #> lip 2

Qlogic SANbox 5600 Series Specifications

General

Brand	Qlogic
Model	SANbox 5600 Series
Category	Switch
Language	English