A – Command Line Interface
Show Log Command
59097-02 B A-111
A
Show Log Command
Displays the contents of the log or the parameters used to create and display
entries in the log. The log contains a maximum of 1200 entries. When the log
reaches its entry capacity, subsequent entries overwrite the existing entries,
beginning with the oldest.
Authority None
Syntax show log
[number_of_events]
component
display [filter]
level
options
port
settings
Keywords [number_of_events]
Specifies the number of the most recent events to display from the event log.
[number_of_events] must be a positive integer.
component
Displays the components currently being monitored for events. The components
are as follows:
All
Monitors all components.
Chassis
Monitors chassis hardware components such as fans and power supplies.
Eport
Monitors all E_Ports.
Mgmtserver
Monitors management server status.
Nameserver
Monitors name server status.
None
Monitor none of the component events.
To Next Page
Loading...
Need help?
General
