A – Command Line Interface
Show Command
59097-02 B A-95
A
pagebreak
Displays the current pagebreak setting. The pagebreak setting limits the display of
information to 20 lines (On) or allows the continuous display of information without
a break (Off).
perf [option]
Displays performance information for all ports. Refer to the ”Show Perf Command”
on page A-115.
port [port_number]
Displays operational information for the port given by [port_number]. Ports are
numbered beginning with 0. If [port number] is omitted, information is displayed for
all ports. Table A-27 describes the port parameters.
Table A-27. Show Port Parameters
Entry Description
AIinit Incremented each time the port begins AL initialization.
AIinitError Number of times the port entered initialization and the initializa-
tion failed.
Bad Frames Number of frames that have framing errors.
ClassXFramesIn Number of class x frames received by this port.
ClassXFramesOut Number of class x frames sent by this port.
ClassXWordsIn Number of class x words received by this port.
ClassXWordsOut Number of class x words sent by this port.
ClassXToss Number of times an SOFi3 or SOFn3 frame is tossed from
TBUF.
DecodeError Number of decode errors detected
EpConnects Number of times an E_Port connected through ISL negotiation.
FBusy Number of times the switch sent a F_BSY because Class 2
frame could not be delivered within ED_TOV time. Number of
class 2 and class 3 fabric busy (F_BSY) frames generated by
this port in response to incoming frames. This usually indicates
a busy condition on the fabric or N_Port that is preventing deliv-
ery of this frame.
Flowerrors Received a frame when there were no available credits.
FReject Number of frames from devices that were rejected.
InvalidCRC Invalid CRC detected.
To Next Page
Loading...
Need help?
General
