A – Command Line Interface
Set Setup Command
A-82 59097-02 B
S
Set Setup Command
Manages configuration settings for Remote Authentication Dial-In User Service
(RADIUS) servers, switch services, SNMP, and system configurations.
Authority Admin session
Syntax set setup
radius
services
snmp
system
Keywords radius
Prompts you in a line-by-line fashion to configure RADIUS servers for user
account and device authentication. Table A-23 describes the RADIUS server
configuration fields.
Table A-23. RADIUS Service Settings
Entry Description
DeviceAuthOrder Authenticator priority for devices:
Local: Authenticate devices using only the local security
database. This is the default.
Radius: Authenticate devices using only the security
database on the RADIUS server.
RadiusLocal: Authenticate devices using the RADIUS
server security database first. If the RADIUS server is
unavailable, then use the local switch security database.
UserAuthOrder Authenticator priority for user accounts:
Local: Authenticate users using only the local security
database. This is the default.
Radius: Authenticate users using only the security data-
base on the RADIUS server.
RadiusLocal: Authenticate users using the RADIUS
server security database first. If the RADIUS server is
unavailable, then use the local switch security database.
TotalServers Number of RADIUS servers to configure during this session.
Setting TotalServers to 0 disables all RADIUS authentica-
tion. The default is 0.
ServerIPAddress IP address of the RADIUS server. The default is 10.0.0.1.
To Next Page
Loading...
Need help?
General
