Current Section: AUTO 12
Navigation:
2.1 Alarms
An alarm condition can occur when programming omissions or other issues prevent normal
irrigation.
1 Turn the controller dial to AUTO
2 When an alarm condition is present, the Alarm key label will be present on screen. The
alarm indicator will also be lit red, this will be visible even with the lid closed. Press the
Alarm key to view alarm details.
3 Any present alarm conditions will then be shown. Press the More key to continue to the
next page
•
Take the appropriate action to address each alarm condition. When all alarms have been addressed, the
alarm light on the front panel will no longer be illuminated.
Alarm Condition
No Water Days There are no water days set in any program.
No Run Times There are no run times set in any program.
No Start Times There are no start times set in any program.
No PGM will AUTO Run There is no program with start times, run times and water days.
Max PGMs Stacked Max is 10 (equal to the start times).
Flow Alarm Shows for high or low ow conditions. See "Flow Alarms" for more details.
Zero Learned Flow 0 ow is learned for 1 or more stations FloWatch is turned on. See "Set Flo-Manager" for more details.
Invalid Module An incompatible module is installed in the cabinet.
No AC power The panel is running on the 9V battery (no AC).
To Next Page
Loading...
Need help?
General
