Rain Bird LXME2 User Manual

Current Section: Alarms/ History 49 Navigation:
10.4.3 Flow Alarms
The LXME2 controller can be set up to issue alarms when ow conditions are in excess of your High
Flow settings or below your Low Flow settings.
Occasionally a ow condition will be detected If the controller is set up to issue alarms for these
conditions, the alarm light will illuminate and detailed descriptions of the Flow Alarm conditions will
be created.
Station Flow Alarms
Flow Alarms
Next
Station Flow Alarms
FloZone Flow Alarms
Clear Flow Alarms
1 Turn the controller dial to Alarms/History
2 At the ALARMS AND HISTORY screen, press the key to select “Flow Alarms”, then press
Next .
3 At the Flow Alarms screen, with “Station Flow Alarms” selected, press Next .
4 The Station Flow Alarms screen appears, showing the rst station where there is an
alarm. Press the and keys to view the Next Station Flow Alarm.
5 Note each station which has an alarm, then see “Clear Flow Alarms” below for more
details on how to clear ow alarms.

Rain Bird LXME2 Specifications

General

Brand	Rain Bird
Model	LXME2
Category	Controller
Language	English