Rain Bird LXME2 User Manual

Current Section: Installation 87 Navigation:
•
To remove a module, press in on the (two) release buttons on either side of a module.
17.5 Dynamic Station Numbering
A Module Conguration screen is displayed whenever the LXME2 Controller detects a change in
module conguration. The Module Summary screen displays the module type detected in each
module slot along with the station numbers. With the Module Labels screen displayed. Locate the
Module Station Numbering Labels that are provided on a separate foldout sheet.
The Module Station Numbering Screen displays a pair of letters (example: Slot 1 = Label AC) for each
installed module. Find the station numbering label on the foldout sheet with the matching letter pair
and place it over the blue strip on the module. This label shows which station number each terminal
block is mapped to.
Done
SM12 SM12
SM12SM12
01
1
2
3
4
12
25
36
37
48
13
24
AC
AL
BG
BP
•
For alternate station numbering see Module/ Station Numbering

Rain Bird LXME2 Specifications

General

Brand	Rain Bird
Model	LXME2
Category	Controller
Language	English