Rain Bird LXME2 User Manual

Current Section: Flow Sensor 59 Navigation:
LEARN FLOW MENU
Next
All Stations
Select Stations
LEARN FLOW
Next
00 : 00
HH : MM
Start Learn Flow In
LEARN FLOW
Next
06 : 00
HH : MM
Start Learn Flow In
4 At the LEARN FLOW MENU screen, with “All Stations” selected, press Next .
5 A conrmation screen appears; press Next again.
6 An information screen appears; press Next again.
7 To start the Learn Flow exercise immediately, press Next . Or else press the
and keys
to set a delayed start time. Press the
and to navigate between the number setting
elds.
•
You can choose to run the exercise Now (00:00) or choose a timed delay of up to 24 hours.
8 A conrmation screen appears, conrming the Learn Flow will overwrite the existing
ow rates. Press Start to set the Learn Flow exercise.
9 The Learn Flow Starting conrmation screen shows the time delay until the Learn Flow
operation will start.
•
An alarm will be posted if one or more stations learn a ow rate of 0 (zero). Check the valve if you receive this
alarm.
NOTICE
Be sure to Learn Flow again if you make any changes to your system which aect its hydraulics.
13.1.1 Selected Stations
•
Ensure you have Run Times set up for all stations included in a Learn Flow exercise prior to setting up a Learn
Flow.

Rain Bird LXME2 Specifications

General

Brand	Rain Bird
Model	LXME2
Category	Controller
Language	English