Current Section: Setup 14
Navigation:
4. SETUP
The Setup dial position allows you to set up master valves, station valves, sensors as well as stations.
4.1 Master Valves
Master Valves Setup tells the LXME2 controller if a Master Valve (MV) or pump, or both is used by your
irrigation system.
The Master Valve can be congured either as a Normally Open Master Valve (NOMV) or as a Normally
Closed Master Valve (NCMV).
Models only
MV2/P can be congured only as a pump start or Normally Closed Master Valve (NCMV).
MV2/P can be turned on and o by station but always operates in conjunction with MV1.