Rain Bird LXME2 User Manual

Current Section: INTRODUCTION 9 Navigation:
1.8 Programming Checklist
When programming the LXME2 controller for the rst time, it is recommended that you complete
the following steps in order.
1.8.1 Set Up Hardware
Install Base Module (BCM or
PSM)
Install Station module[s]
Fill out Programming Guide
Clear program information
Select language
Set the current date and time
Set up master valves/ pumps
(optional)
Set up weather sensors (optional)
Set up stations
Set up a ow sensor (optional)
1.8.2 Set Up Programs
Select program
Set watering start times
Select watering days *
Set station run time(s)
* See Watering Days dial position for Odd, Odd31, Even and Cyclical watering cycles.
1.8.3 Set Up Advanced Programming (Optional)
Set seasonal adjust
Create a water window
Set up a station delay
Set up Simulstations

Rain Bird LXME2 Specifications

General

Brand	Rain Bird
Model	LXME2
Category	Controller
Language	English