Ricoh AficioSP C410DN User Manual

Maintenance Menu
141
5
Maintenance menu parameters
This section explains about parameters that can be set on the Maintenance menu.
Quality Maintenance
❖ Colour Registration
You can specify Auto Adjust or Fuser Adjust for this feature.
❖ Colour Calibration
You can adjust the gradation of bright (highlighted parts) and medium areas
(middle parts) for printing.
• Adjust Auto Density
You can print the gradation of auto density.
• Print Sheet 1
You can print gradation correction sheet 1.
• Print Sheet 2
You can print gradation correction sheet 2.
• Reset Setting
You can reset the gradation correction value to default.
Reference
For details, see “Correcting the Color Gradation”, Hardware Guide.
❖ Registration
You can adjust the starting position of the printing page.
• Print Test Sheet
You can print the registration test sheet.
Tray 1, Tray 2, Tray 3, Bypass Tray, Duplex Back Side
Note
❒ Only the installed trays appear on the display panel.
•Adjustment
You can select the start position for printing on a page.
Horizontal : Tray 1, Horizontal : Tray 2, Horizontal : Tray 3, Horizontal :
Bypass Tray, Horizontal : Duplex Back, Vertical : Tray 1, Vertical : Tray 2,
Vertical : Tray 3, Vertical : Bypass Tray, Vertical : Duplex Back
Note
❒ Only the installed trays appear on the display panel.
❖ 4 Colour Graphic Mode
This mode adjusts levels of toner color overlap. If characters or lines blur, select-
ing [Text Priority] may make them clearer. Select [Photo Priority] for normal use.
Note
❒ Default: Photo Priority

Ricoh AficioSP C410DN Specifications

General

Brand	Ricoh
Model	AficioSP C410DN
Category	Printer
Language	English