Monitoring and Configuring the Printer
190
6
Viewing and Deleting Spool Print Jobs
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device<TCP/IP>], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
A list of printer using the selected protocol appears.
Select the protocol of the printer whose configuration you want to change.
If you are using TCP/IP SNMP v3, enter the user authentication.
C Select a printer in the list, and then click [Spool Printing Job List(Printer)] on the
[Tools] menu.
A Web browser opens and the dialog box for entering the login user name
and password for the Web Image Monitor administrator appears.
D Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network
administrator.
Spool Printing Job List appears in the Web Image Monitor.
To delete the Spool Printing Job, select the document you want to delete and
then click [Delete].
Note
❒ To display Spool Printing Job List, spool must be set to [Enable] on Web Im-
age Monitor in advance.
❒ For details, see Help in the Spool Printing Job List area.
To Next Page
Loading...
Need help?
General