Remote Maintenance by telnet
203
6
❖ IP TTL setting
msh> bonjour ip ttl {1-255}
You can specify the IP TTL (the number of routers a packet can pass through).
Note
❒ The default is 255.
❖ Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname | location}
•cname
Reset the computer name. The default computer name will be displayed
when the computer is restarted.
•location
Reset the location information. The previous location information will be
deleted.
❖ Interface configuration
msh> bonjour linklocal “interface_name”
• If many types of interface are installed, configure the interface that com-
municates with linklocal address.
• If you do not specify an interface, the Ethernet interface is automatically se-
lected.
• wlan can be specified only when the IEEE 802.11b interface is installed.
btconfig
Use the “btconfig” command to make Bluetooth settings.
❖ View settings
Bluetooth settings are displayed.
msh> btconfig
❖ Mode settings
You can set the Bluetooth operation mode to {private} or {public}.
msh> btconfig {private | public}
• The default is {public}.
Interface Interface configured
ether Ethernet interface
wlan IEEE 802.11b interface
To Next Page
Loading...
Need help?
General