Ricoh AficioSP C410DN User Manual

Monitoring and Configuring the Printer
188
6
C In the list, select a printer whose configuration you want to change.
D On the [Tools] menu, click [NIB Setup Tool].
A Web browser opens and the dialog box for entering the password for the
Web Image Monitor administrator appears.
NIB Setup Tool starts when the network interface board is default. Follow the
instruction on the screen.
E Enter the user name and password, and then click [Login].
For details about the user name and password, consult your network admin-
istrator.
Top Page of Web Image Monitor appears.
F Click [Configuration].
G Click [Device Settings].
H Click [Program/Change Administrator], and then change the settings.
I Quit Web Image Monitor.
J Quit SmartDeviceMonitor for Admin.
Checking the Printer Status
Follow the procedure below to check printer status.
A Start SmartDeviceMonitor for Admin.
B On the [Group] menu, point to [Search Device<TCP/IP>], and then click [TCP/IP],
[IPX/SPX] or [TCP/IP SNMPv3].
The status of printers is indicated by icons in the list.
If you are using TCP/IP SNMPv3, enter the user authentication.
C To obtain status details, click the printer in the list, and then click [Open] on
the [Device] menu.
The printer status appears in the dialog box.
D Click [System] or [Printer].
The printer status appears in the dialog box.
E Quit SmartDeviceMonitor for Admin.
Note
❒ For details about status icons and items in the dialog box, see SmartDevice-
Monitor for Admin Help.

Ricoh AficioSP C410DN Specifications

General

Brand	Ricoh
Model	AficioSP C410DN
Category	Printer
Language	English