Ricoh AficioSP C410DN User Manual

Remote Maintenance by telnet
209
6
❖ Initializing the printer name for each interface
msh>hostname “interface_name” clear “name”
ifconfig
Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet
mask, broadcast address, default gateway address) for the printer.
❖ View settings
msh> ifconfig
❖ IPv4 Configuration
msh> ifconfig “interface_name” “parameter” “address”
• If you did not enter an interface name, it is automatically set to the Ethernet
interface.
• wlan can be specified only when the IEEE 802.11b interface is installed.
The following explains how to configure an IPv4 address 192.168.15.16 on
Ethernet interface.
msh> ifconfig ether 192.168.15.16
❖ IPv6 Configuration
msh> ifconfig ether inet6 “interface_name ” “prefixlen”
The following explains how to configure a IPv6 address to 2001:DB8::100 with
prefix length 64 on the Ethernet interface.
msh> ifconfig ether inet6 2001:DB8::100 64
❖ Netmask configuration
msh> ifconfig “interface_name” netmask “address”
The following explains how to configure a subnet mask 255.255.255.0 on Eth-
ernet interface.
msh> ifconfig ether netmask 255.255.255.0
❖ Broadcast address configuration
msh> ifconfig “interface_name” broadcast “address”
❖ Changing the Interface
msh> ifconfig “interface” up
• You can specify either the Ethernet interface or IEEE 802.11b interface
when using the optional IEEE 802.11b interface unit.
Interface name Interface configured
ether Ethernet Interface
wlan IEEE 802.11b Interface

Ricoh AficioSP C410DN Specifications

General

Brand	Ricoh
Model	AficioSP C410DN
Category	Printer
Language	English