Ricoh AficioSP C410DN User Manual

Printing Files Directly from Windows
269
8
Windows 2000/XP, Windows Server 2003, Windows NT 4.0
A Open the hosts file using memo pad files, for instance.
The hosts file is in the following folder:
\WINNT\SYSTEM32\DRIVERS\ETC\HOSTS
“\WINNT” is the directory of the installation destination for Windows
2000/XP, Windows Server 2003, and Windows NT 4.0.
B Add an IPv4 address and host name to the hosts file using the following
format:
192.168.15.16 host # NP
“192.168.15.16” is the IPv4 address, “host” is the printer's host name, and “#NP”
is replaced by comments. Insert a space or tab between “192.168.15.16” and
“host”, between “host” and “#NP” respectively, using one line for this format.
C Save the file.
Note
❒ When using a host name under Windows Server 2003 with IPv6 protocol,
perform host name resolution using an external DNS server. The host file
cannot be used.
Printing Commands
The following explains printing operations using the “lpr”, “rcp”, “ftp”, and
“sftp” commands.
Enter commands using the command prompt window. The location of the com-
mand prompts varies depending on operating systems:
• Windows 95/98
[Start] - [Programs] - [MS-DOS Prompt]
•Windows Me
[Start] - [Programs] - [Accessories] - [MS-DOS Prompt]
• Windows 2000
[Start] - [Programs] - [Accessories] - [Command Prompt]
• Windows XP, Windows Server 2003
[Start] - [All Programs] - [Accessories] - [Command Prompt]
•Windows NT 4.0
[Start] - [Programs] - [Command Prompt]

Ricoh AficioSP C410DN Specifications

General

Brand	Ricoh
Model	AficioSP C410DN
Category	Printer
Language	English