Host Interface Menu
167
5
Host Interface menu parameters
This section explains parameters that can be set on the Host Interface menu.
❖ I/O Buffer
You can select the size of I/O Buffer. Normally it is not necessary to change
this setting.
• 128 KB
• 256 KB
Note
❒ Default: 128 KB
❖ I/O Timeout
You can set how many seconds the printer should wait before ending a print
job. If printing operation is frequently interrupted by data from other ports,
you can increase the timeout period.
• 10 seconds
• 15 seconds
• 20 seconds
• 25 seconds
• 60 seconds
Note
❒ Default: 15 seconds
❖ Network
You can make network-related settings.
Important
❒ This menu appears only when the optional 802.11 interface unit is in-
stalled.
Reference
For details, see “Configuration”, Hardware Guide.
To Next Page
Loading...
Need help?
General