SM 5-93 G147
Service
Tables
SP5990>>
Print Mode
4. Push $ [#Enter].
SP5990-001
All Data List
5. Push $ to select "Diagnostic Report".
SP5990-005
Diagnostic Repor
6. Push [#Enter].
Diagnostic Repor
execute?
7. Push [#Enter] to print the pattern.
Diagnostic Repor
Processing…
8. You can repeat this procedure for as many test prints as you need.
 After you enter a Print Test Pattern number, the test pattern prints, and not the
SMC Report. The machine will remain in this mode until you leave the Service
Mode, or turn the printer off and on.
 After leaving the re-entering the Service Mode, or after turning the machine off
and on, the SMC Report feature is restored to normal operation.
5.3.3 SP2902-03 PRINTING TEST PATTERNS
No. Test Pattern No. Test Pattern
0 *0:None 14 14:Black Band
1 1:Vert. Line 1 15 15:Ind. Pat. 4
2 2:Hori. Line 1 16 16:Hori. L1 Rev.
3 3:Vert. Line 2 17 17:Grid P1 Rev.
4 4:Hori. Line 2 18 18:Ind. P1 Rev.
5 5:Grid Pat. 1 19 19:Grayscale (H)
To Next Page
Loading...
Need help?
General
