G147 6-56 SM
SP2-301: Transfer Current Adjustment
Image areas SP2-301-1 1st Side of Paper
SP2-301-2 2nd Side of Paper
SP2-301-4 By-pass Feed
Leading edge areas SP2-301-3 Leading Edge
SP2-301-5 Leading Edge By-pass Feed
SP2-911: Transfer Current Timing
Timing SP2-911-1 On Timing (at leading edge)
SP2-911-2
Switch Timing (from leading
edge to image area current
SP2-911-3 Off Timing (at trailing edge)
6.12.6 TRANSFER BELT CLEANING MECHANISM
The cleaning blade [A], always in contact with the transfer belt, scrapes off toner and paper
dust remaining on the transfer belt.
Scraped off toner and paper dust falls into the toner collection tank [B] in the transfer belt
unit. This toner is not recycled. When the toner overflow sensor [C] detects toner overflow,
the toner overflow indicator lights. Up to 999 copies can be made before the toner overflow
condition shuts down the machine.
To Next Page
Loading...
Need help?
General
