G147 6-64 SM
6.14 ENERGY SAVER MODE
If the printer remains idle for the selected time interval, the machine automatically enters the
energy saver mode and switches off the fusing lamps to reduce power consumption.
The customer can select the idle time interval or switch the energy saver mode off. The
Energy Saver selector setting is in the System menu, which can be accessed at the printer
operation panel:
[Menu]> System> Energy Saver> E. Saver On/Off (*On)
[Menu]> System> Energy Saver> E. Save Timer (*1 minute)
[Menu] Settings
Energy Saver On/Off On (default)
Energy Saver Timer *1 (default), 5, 15, 30, 45, 60 minutes
 After the machine remains idle for the specified time, the CPU switches off the fusing
lamps.
 The machine leaves the energy saver mode and returns to normal operation when any
key on the operation panel is pressed, when the printer receives a print job from the
computer, or after the printer is switched off and on.
 The time from receiving the print start command to making the first print is longer than
when powering up from normal standby mode.
For details, see the Operating Instructions.
To Next Page
Need help?
General
