G147 6-60 SM
6.13.5 EXIT GUIDE PLATE AND DE-CURLER ROLLERS
The exit guide plate [A] also functions as a pressure roller stripper. The exit guide plate can
be moved in order to remove jammed paper.
Stacking has been improved by mounting a face-curl correction mechanism at the paper exit
roller.
Two de-curler rollers [B] and [C] have been added under the exit roller [D] to correct the curl
that paper acquires during transport through the fusing unit.
6.13.6 PRESSURE ROLLER
The pressure springs [A] apply constant pressure between the hot roller [B] and the
pressure roller [C]. The applied pressure can be changed by adjusting the position of the
pressure springs. The left position [D] is the normal setting, and the right position [E]
increases the pressure to prevent insufficient fusing by the fusing unit.
To Next Page
Loading...
Need help?
General
