SM 1-27 G147
Installation
 If an SD card was used to combine applications on that card, that SD card cannot
be used for any other purpose.
Merging Applications
Do this procedure to put more than one application on one SD card.
 During this procedure, make sure that you put the source SD card and the target
SD card in the correct slots.
1. Turn off the machine.
2. Remove the SD card slot cover [1] (
x2).
3. Put the Source (DOS) SD card [2] in C3. This card contains the application that
you want to copy.
4. Put the Target SD card in C1 [3]. The application on the card in C3 will be copied
to this card.
5. Turn the machine on.
6. Go into the SP mode and select SP5873 001.
7. Push [#Enter].
8. Read the instruction on the display then push [#Enter] to start copying.
9. When the display tells you copying is completed, push [#Enter].
10. Turn the machine off.
11. Remove the Source SD card from C3. Leave the target SD card in C1.
12. Turn the machine on.
To Next Page
Loading...
Need help?
General
