7. Select [Standard TCP/IP Port] on [Create a new port:], and then click [Next].
8. Enter the IP address of this machine in [Host Name or IP address].
9. Clear the [Query the printer and automatically select the driver to use] check box, and
then click [Next].
Searching for the TCP/IP port starts.
10. When the "Additional port information required" screen is displayed, select [RICOH
Network Printer C model], and then click [Next].
11. Click [Have Disk...]
[Browse...] to specify the driver (INF file), and then click [OK].
The driver is stored in the [DISK1] folder in the folder that was created when unzipping the
downloaded file.
12. Select a printer driver to install, and then click [Next].
13. Enter the printer name as necessary, and then click [Next].
Printer driver installation starts.
14. Specify the printer as a shared printer as necessary, and then click [Next] [Finish].
If the Machine Cannot Be Found
The "Network Connection Error" screen is displayed.
Confirm and perform to , and then click [OK]. If the machine still cannot be found, specify the IP
address or machine name to install the printer driver.
5. Print
118
To Next Page
Loading...
Need help?
General
