Even if you select [Do not Place], you can add shortcuts to the program to the Home screen after
the program registration is complete.
9. Press [Exit].
Changing the Contents of the Program
You can change a part of the program and overwrite it or change the contents and register them as a
new program.
1. On the Home screen, press [Copy], [Fax], or [Scanner].
If the icon is not displayed on the Home screen, add the icon from the application list screen.
page 49 "Adding a Frequently Used Application or Widget to the Home Screen"
2. Press [Menu] ( ), and then press [Recall Program].
3. Press the program number to be changed.
4. Change the scan and output settings.
5. Press [Menu] ( ), and then press [Set Current Settings to Program].
6. Select a program number to register the changed settings.
• To overwrite the program, select the number of the loaded program, and then press
[Program] on the message appears.
2. Getting Started
54
To Next Page
Loading...
Need help?
General
