The Aim of Anti-tip Components and Precautions
 The anti-tip components are necessary for meeting the requirements of IEC60950-1, the
international standard for safety.
 The aim of these components is to prevent the products, which are heavy in weight, from
toppling as a result of people running into or leaning onto the products, which can lead to
serious accidents such as persons becoming trapped under the product. (U.S.:
UL60950-1, Europe: EN60950-1) Therefore, removal of such components must always
be with the consent of the customer. Do not remove them at your own judgment.
Power
 Always disconnect the power plug before doing any maintenance procedure. After
switching off the machine, power is still supplied to the main machine and other devices.
To prevent electrical shock, switch the machine off, wait for a few seconds, then unplug
the machine from the power source.
 Before you do any checks or adjustments after turning the machine off, work carefully to
avoid injury. After removing covers or opening the machine to do checks or adjustments,
never touch electrical components or moving parts (gears, timing belts, etc.).
 After turning the machine on with any cover removed, keep your hands away from
electrical components and moving parts. Never touch the cover of the fusing unit, gears,
timing belts, etc.
Installation, Disassembly, and Adjustments
 After installation, maintenance, or adjustment, always check the operation of the machine
to make sure that it is operating normally. This ensures that all shipping materials,
protective materials, wires and tags, metal brackets, etc., removed for installation, have
been removed and that no tools remain inside the machine. This also ensures that all
release interlock switches have been restored to normal operation.
 Never use your fingers to check moving parts causing spurious noise. Never use your
fingers to lubricate moving parts while the machine is operating.
To Next Page
Loading...
Need help?
General
