SP Mode
Tables
1002
[Side-to-Side Registration]
Adjusts the side-to-side registration by changing the laser main scan start
position for each mode and tray.
Increasing a value: an image is moved to the rear edge of paper.
Decreasing a value: an image is moved to the front edge of paper.
001 By-pass Table *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
002 Paper Tray 1 *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
003 Paper Tray 2 *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
004 Paper Tray 3 *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
005 Duplex *ENG [-4.0 to 4.0 / 0.0 / 0.1mm/step]
1003
[Paper Buckle] Paper Buckle Adjustment
(Tray Location, Paper Type), Paper Type: N: Normal, TH: Thick
Adjusts the amount of paper buckle at the registration roller by changing the
paper feed timing.
001 Paper Tray1: Plain *ENG [-5 to 5 / 2 / 1mm/step]
002 Paper Tray1: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
003 Paper Tray1: Thick *ENG [-5 to 5 / 0 / 1mm/step]
004 Paper Tray2/3: Plain *ENG [-5 to 5 / 0 / 1mm/step]
005 Paper Tray2/3: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
006 Paper Tray2/3: Thick *ENG [-5 to 5 / 0 / 1mm/step]
007 By-pass: Plain *ENG [-5 to 5 / 0 / 1mm/step]
008 By-pass: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
009 By-pass: Thick *ENG [-5 to 5 / 0 / 1mm/step]
010 Duplex: Plain *ENG [-5 to 5 / 0 / 1mm/step]
011 Duplex: Middle Thick *ENG [-5 to 5 / 0 / 1mm/step]
To Next Page
Loading...
Need help?
General
