Main SP Tables-5
SM Appendix 3-347 D117/D118
Retransmission Ringing CTL
[- / - / -]
[Execute]
Normally, it is best to allow unlimited time for certification and ID2 update
requests, and for the notification that the certification has been completed.
However, RCG-M generates charges based on transmission time for the
customer, so a limit is placed upon the time allowed for these transactions.
If these transactions cannot be completed within the allowed time, do this SP
to cancel the time restriction.
186
FAX TX Priority *CTL
[0 or 1/ 0 / 1/step]
0: Disable, 1: Enable
This SP determines whether pushing the off-hook button will interrupt a
RCG-M transmission in progress to open the line for fax transaction. This SP
can be used only if SP5816 164 is set to "0".
200
Manual Polling *CTL
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
201
Regist Status CTL [0 to 4 / 0 / 1/step]
Displays a number that indicates the status of the @Remote service device.
0: Neither the registered device by the external nor embedded RCG device is
set.
1: The embedded RCG device is being set. Only Box registration is
completed. In this status, this unit cannot answer a polling request from the
external RCG.
2. The embedded RCG device is set. In this status, the external RCG unit
cannot answer a polling request.
3. The registered device by the external RCG is being set. In this status the
embedded RCG device cannot be set.
4 The registered module by the external RCG has not started.
To Next Page
Loading...
Need help?
General
