Main SP Tables-5
D117/D118 3-378 SM Appendix
5858
[Debug Save When]
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857-002.
SP5858-3 stores one SC specified by number. Refer to Section 4 for a list of
SC error codes.
001
Engine SC Error *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes generated by printer engine errors.
002
Controller SC Error *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Turns on/off the debug save for SC codes generated by GW controller errors.
003
Any SC Error *CTL [0 to 65535 / 0 / 1/step]
004
Jam *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
Turns on/off the debug save for jam errors.
5859
[Debug Save Key No.]
These SPs allow you to set up to 10 keys for log files for functions that use
common memory on the controller board.
001 Key 1 *CTL
[-9999999 to 9999999 / 0 / 1/step]
002 Key 2 *CTL
003 Key 3 *CTL
004 Key 4 *CTL
005 Key 5 *CTL
006 Key 6 *CTL
007 Key 7 *CTL
008 Key 8 *CTL
To Next Page
Loading...
Need help?
General
