Process Control Error Conditions
D117/D118 6-80 SM
6.2.3 LINE POSITION ADJUSTMENT RESULT
SP2-194-010 to -012 (Line Position Adjustment Result: M, C, Y)
This SP shows the number as a line position adjustment result on the LCD. It shows which color
has an error (M, Y or C).
No. Result Description Note
0 Not done Line position adjustment has not been done. -
1
Completed
successfully
Line position adjustment has correctly been
done,
-
2
Cannot detect
patterns
ID sensors have not detected the patterns for
line position adjustment.
See Note
3
Fewer lines on
the pattern than
the target
The patterns, which ID sensors have detected,
are not enough for line position adjustment.
See Note
4
More lines on
the pattern than
the target
Not used in this machine. -
5
Out of the
adjustment
range
ID sensors have correctly detected the patterns
for line position adjustment, but a shift of
patterns is out of adjustable range.
See Note
6-9 Not used - -
 For details, see the "Troubleshooting Guide - Line Position Adjustment" section.
To Next Page
Loading...
Need help?
General
