Cleaning the Paper Feed Path in the Multi Bypass Tray
1. Clean the side fences and front guide.
2. Clean the paper feed rollers.
3. Clean the guide board.
4. After cleaning, restore the machine so that it resumes operation.
• For details about detaching and reattaching the parts, see Replacement Guide.
Cleaning the Paper Feed Rollers and Paper Feed Belt in the Interposer
Clean the paper feed belt and paper feed rollers in the interposer.
The procedure is explained using the interposer upper tray. The procedure is the same for the lower tray.
1. Remove the loaded paper.
Cleaning the Paper Feed Path
125
To Next Page
Need help?
General
