No Contact your service representative.
• When you set [Deactivate Image Position Adjustment Across Feed] to [Deactivate Only Jam
Detection], the printed image may become misaligned.
Sheets of mixed type, thickness, or color are loaded in the paper tray.
Load identical sheets in the paper tray.
To disable the function for detecting paper misalignment
<If using customer paper>
Select [Machine: Image Position] in [Advanced Settings] for the custom paper being used, select 1101:
[Image Position] and set [Deactivate Image Position Adjustment Across Feed] to [Deactivate Only Jam
Detection].
<If not using custom paper>
Under [Adjustment Settings for Operators] menu, in the [Main Unit: Image Position] group, set 0105:
[Deactivate Image Position Adjustment Across Feed] to [Deactivate] or [Deactivate Only Jam Detection].
• Setting [Deactivate Image Position Adjustment Across Feed] to [Deactivate] or [Deactivate Only
Jam Detection] may cause the printed image to be misaligned.
If (J080) Appears
Cause:
The paper feed is delayed.
This may occur if slippery paper with a low paper-to-paper friction coefficient is used.
Solution:
1. Select [Machine: Paper Feed / Output] in [Advanced Settings] for the custom paper in
use, select 1341: [Jam Detection] and set [Registration Jam Detection with Feed Direction]
to [Off].
2. Print the image. Is the problem resolved?
Yes Finished!
No Contact your service representative.
Messages Reporting Paper Misfeeds
77
To Next Page
Loading...
Need help?
General
