3. The trailing edge of the sheet, while delivered, is left in the paper exit.
Paper feed direction
Stacker shift tray
Paper exit
Paddle
CEZ575
4. The next sheet to be delivered slips under the sheet still in the paper exit and bends back.
Paper feed direction
Stacker shift tray
Paper exit
Paddle
CEZ576
Solution:
Straighten out the sheet by decurling it upward.
1. Load the sheets the other way up.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
To follow the steps below, attach the decurler unit.
3. In the [Main Unit: Paper Feed/ Output] group on the [Adjustment Settings for Operators]
menu, set 0310: [Correct Output Paper Curl] to [U Curl Correction Level: Small].
4. Print the image. Has the problem been resolved?
Yes Finished!
5. Post-Processing Option Troubleshooting
168
To Next Page
Loading...
Need help?
General
