OVERVIEW OF MAIN NEW FEATURES
J006 2 SM
OVERVIEW OF MAIN NEW FEATURES
This document describes the new features and changes of the J006, compared to
the earlier models J001 and J003.
Here is a summary of the important new features of this printer.
• Black ink improvement
The adherence of the black ink has been improved to the equivalent of
permanent marker pen.
• Each ink cartridge provided with an ID chip
Each ink cartridge is equipped with a new ID chip that allows greater accuracy in
displaying the amount of ink remaining (5 steps), enables detection to determine
whether an individual cartridges is set properly, and provides other useful
information about the cartridge.
• Duplex unit
The lock mechanism on the duplex unit and the bypass feed operation have
been improved.
• Secondary count function
The counts for PM parts are based on the length of A4-size paper.
• Print compatibility with used paper and punched paper
Printer driver settings allow the printer to ignore paper width detection to improve
the compatibility of the printer with used punched paper.
NOTE: The section numbers of this document (Sections 1-7) correspond to the
section numbers of the J001/J003 Service Manual.
To Next Page
Loading...
Need help?
General