Duplex Unit
J007/J010/J011 6-52 SM
6.10.4 DUPLEXER SET SWITCH
The Duplex Unit set switch [1], a micro-switch in the printer, detects the presence of the
Duplex Unit.
This occurs when the Duplex Unit is installed correctly on the back of the printer:
The unit the set lever [2] depresses the Duplex Unit set switch. Then it turns it on.
The printer signals an error (Paper Jam – Type 1) at these times:
The Duplex Unit is not installed correctly
The set lever has not fully depressed the Duplex Unit set switch
The duplex unit is not an option for this printer.
The duplex unit must be installed at all times in order for the printer to operated
properly.
6.10.5 BYPASS (OPTION)
The Multi Bypass Tray J507 is an option that can be used with the J007/J010 or J011. This
is an external tray that can be detached and then reattached whenever it is needed.
To Next Page
Loading...
Need help?
General