Roland VS-2000 Owner's Manual Addendum

2—Version Two Enhancements
Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com 15
Added parameters and shortcuts
UTILITY Menu System Parameter
DYNAMICS/4Bnd EQ Sw parameter has been added
on the Param1 screen of the UTILITY menu’s System
parameter. This selects the screen that appears in the
LCD display when you press DYNAMICS or EQ. You
can set the parameter to:
• Dynm/EQ —the Dynamics or Equalizer screen for
the current channel appears.
• Ch VIEW —the Mixer View screen for the current
channel will appear.
UTILITY Menu PlayRec Parameter
FX Rtn SOLO ENABLE parameter has been added on
the Param1 screen of the UTILITY menu’s PlayRec
parameter. This specifies solo setting of EX return
channels. You can set the parameter to:
• On —channel 1-6 of FX return will be automatically
soloed subject that solo of Input or Track channel is
turned on.
• Off —no channel of FX return will be automatically
soloed. Solo must be manually set selecting channel
of FX return.
The METRONOME screen
OUTPUT SELECT parameter has been added on the
METRONOME screen ( Owner’s Manual Page 308).
When you set METRONOME OUT parameter to INT ,
this field selects the output jack(s) and a digital
connector from which the metronome sound will be
output. The metronome sound will be output from the
jack(s) whose check box is selected.
In the VGA display, the Mixer View screen for the current channel is always displayed.
This setting is valid if SOLO/MUTE TYPE PlayRec parameter is set to All BUS Send.
VS2000v2Add.book 15 ページ ２００５年４月８日 金曜日 午後２時２４分

Roland VS-2000 Specifications

General

Brand	Roland
Model	VS-2000
Category	Musical Instrument
Language	English