Roland VS-2000 Owner's Manual Addendum

Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com 29
4—VGA Main Display Universal Elements
This chapter describes the areas of the VGA main display that are always visible no
matter how the rest of the display changes. These are the:
• menus • control bar
• PAN knob strip • clipping indicators
• F buttons • status strip
• remaining space status strip
The illustration on Page 24 shows where these elements are located on the VGA.
VGA Menus
The menus at the top of the VGA display give you quick mouse access to all of the
features found in the VS-2000’s onboard menus, and also contain items unique to the
VGA main display. To select an item from a menu:
1. Click the desired menu with your mouse to display the
menu’s contents.
2. Move the cursor over the desired menu item to highlight it in
blue and click the item with your mouse.
An arrow to the right of a menu
item signifies additional choices presented in a
submenu. Hold you mouse cursor over the main menu
item, drag rightward and down to select the desired
item from the submenu and click your mouse.
To close a menu, click elsewhere on the screen or press EXIT/NO.
The PROJECT Menu
The PROJECT menu contains an assortment of options that relate to an
entire project.
Menu item: See Owner’s Manual Page:
NEW 102
RELOAD (See Addendum Page 30)
NAME 103
PROTECT 104
OPTIMIZE 105
SPLIT 107
EXPORT 113
PROJECT LIST 99
STORE (See Addendum Page 30)
SHUTDOWN 85
VS2000v2Add.book 29 ページ ２００５年４月８日 金曜日 午後２時２４分

Roland VS-2000 Specifications

General

Type	Digital Audio Workstation
A/D/A Conversion	24-bit
MIDI	MIDI In/Out
Simultaneous Recording Tracks	8
Sampling Frequency	44.1kHz, 48kHz
Effects	Built-in effects including reverb, delay, chorus, and more
Inputs	8 XLR/TRS combo inputs, 2 RCA inputs
Outputs	2 RCA outputs, headphone output
Storage	Internal hard drive (40GB), optional CD-RW drive
Display	LCD