Roland VS-2000 Owner's Manual Addendum

6—VGA Main Display CH VIEW Screens
62 www.Roland.com Roland VS-2000 Owner’s Manual, Version Two Addendum
FX Return Channel Parameter Strip
1. Channel Name
2. FX Bus ASSIGN
3. GROUP Selector
4. MONO Switch
5. FX LINK Button
6. AUTOMIX STATUS Button
Each FX bus is routed to the input of its same-
numbered effect processor.
To assign the channel to a fader group, click GROUP
and select the desired group from the pop-up menu.
By default, the output of an effect processor is stereo.
To collapse its left and right sides to a mono signal,
click MONO so it lights.
To link the parameter of FX send, click FX LINK so it lights. When it’s lit,
parameters will be linked with add/even numbered partners.
Click the AUTOMIX STATUS button repeatedly to set the channel’s
status as desired when Automix mode is on.
2.
1.
6.
4.
3.
5.
228
228
228
229
343
VS2000v2Add.book 62 ページ ２００５年４月８日 金曜日 午後２時２４分

Roland VS-2000 Specifications

General

Brand	Roland
Model	VS-2000
Category	Musical Instrument
Language	English