6—VGA Main Display CH VIEW Screens
Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com 63
Input and Track Channel CH VIEW Elements
Track/V-Track Info
At the top edge of an input and track channel CH VIEW screen is information about the
corresponding hard disk recorder track and its V-Tracks. If you’re working with:
•
an input channel
—the screen shows information regarding the same-numbered
hard disk recorder track.
•
a track channel
—the screen shows information about its corresponding track.
If the channel is linked, you’ll see track info for both of the corresponding tracks.
Dynamics and EQ Controls
Each input and track channel CH VIEW screen contains a dynamics processor and EQ
that can be set up by dragging your mouse in a graphic display, or manually.
Dynamics
Track and V-Track info for a standard input or track channel
Track and V-Track info for linked input or track channel
The symbols in
the V-Track area
are described on
Page 47.
Interactive graphic displays
Parameters
For an introduction to
dynamics processing,
see
Owner’s Manual
Page 156.
For an introduction to
EQ, see
Owner’s
Manual
Page 160.
Compressor
parameters
Expander
parameters
Type-specific parameters
1. 2.
4.
3.
5.
VS2000v2Add.book 63 ページ 2005年4月8日 金曜日 午後2時24分