4—VGA Main Display Universal Elements
Roland VS-2000 Owner’s Manual, Version Two Addendum www.RolandUS.com 39
PAN Knob Strip
Click square buttons left side of IN1-10 or TR1-18, you can switch display of the PAN
parameter.
To “turn” a knob, click and drag up or down to raise or lower, respectively, its setting.
The VGA Input Clipping Indicators
The VGA main display’s input clipping indicators light when an input
channel’s analog input signal is too loud. The INPUT PEAK LEVEL
parameter sets the level at which they light—see
Owner’s Manual
Page
378.
VGA F Buttons
The F buttons beneath the VGA main display’s content pane (Page 25)
mirror the current behavior of the F buttons beneath the VS-2000’s
internal LCD, as does its PAGE button. You can click the VGA’s F buttons
or the LCD’s at any time with the same results.
PAGE shows the number of screens associated with the current display.
You can move from page to page by pressing
and
.
If you prefer, press F1-F6 on a connected ASCII keyboard instead of clicking with your
mouse or pressing the VS-2000’s physical F buttons. Use Tab as your PAGE button.
PAN select button
Select channel
PAGE
F buttons
VS2000v2Add.book 39 ページ ２００５年４月８日 金曜日 午後２時２４分
To Next Page
Loading...
Need help?
General
