S&C 6800 Series User Manual

Switch Control Setup
Figure 22. The Setup>General>User Notes screen.
Any character used in a standard text le can be entered. Field capacity is 1000
characters. See Figure 22.
Figure 21. The Setup>General>Revisions screen.
Data for the installed version updates whenever a new software revision is installed. The
expected value is stored in the IntelliLink software, and the installed version is loaded
from the connected control.
The latest 6800 Series Automatic Switch Control software revisions are available at
the S&C Automation Customer Support Portal, which requires an assigned user name
and password. Go to this link: sandc.com/en/support/sc-customer-portal/.
Portal access can be registered at this link.
Firmware Revisions
User Notes
S&C Instruction Sheet 1045-530 49

S&C 6800 Series Specifications

General

Brand	S&C
Model	6800 Series
Category	Controller
Language	English