Siemens SIMATIC IPC477D User Manual

Maintaining and servicing your device
7.5 Installing the software
SIMATIC IPC477D, IPC477D PRO
Operating Instructions, 11/2016, A5E31347228-AF
177
7.5.4
Update installation
7.5.4.1
Updating the operating system
Windows
The latest updates for the Windows operating system are available on the Internet at
Microsoft (http://www.microsoft.com) and on the device in the Start menu "Start > All
Programs > Windows Update > Check for updates".
Note
Before you install new drivers or operating system updates for Windows MUI v
ersions,
configure the regional menu and dialog settings and the default English (US) language.
other operating systems
Contact the corresponding manufacturer.
7.5.4.2
Installing or updating application programs and drivers
To install software from a CD and/or floppy disk in a Windows operating system, you must
connect a suitable external USB drive to the computer.
The drivers for USB floppy drives and USB CD-R drives are included in the operating system
and do not have to be installed separately.
For information about installation of SIMATIC software packages, refer to the corresponding
manufacturer documentation.
For updates of third-party drivers and application programs, contact the respective
manufacturer.
7.5.4.3
CP 1616 onboard
NDIS device driver
Read the information in the Installation_CP16xx.pdf document and on the supplied
"Documentation and Drivers" CD/DVD.
PROFINET IO
Read the information of the SIMATIC devices and SIMATIC NET documentation listed in the
section "PROFINET (Page 97)".

Siemens SIMATIC IPC477D Specifications

General

Brand	Siemens
Model	SIMATIC IPC477D
Category	Industrial PC
Language	English