Siemens SIMATIC IPC477D User Manual

Expanding the device and assigning device parameters
6.6 Installing and removing a CFast card
SIMATIC IPC477D, IPC477D PRO
146 Operating Instructions, 11/2016, A5E31347228-AF
6.6.2
Installing and removing a CFast card (internal slot)
The procedures for installing and removing the CFast card are the same for all device
variants. Use only SIMATIC IPC CFast cards for industrial application.
Note
Note the following points:
•
Use the slot described here exclusively for a
CFast card
.
•
Do not insert
CompactFlash cards (CF cards)
into the slot for the CFast card.
•
Always replace the SIMATIC IPC CFast card with a SIMATIC IPC CFast card of the same
production version or higher. For the SIMATIC IPC477D, only SIMATIC CFast cards with
production version 02 or higher may be used.
The production version can be found on the SIMATIC CFast card, see the section
"Accessories (Page 32)".
Requirements
● The device is disconnected from the power supply.
● The device is open.
● Fir 12" touch built-in unit only:
The SSD is removed, see the section "Replacing SSD (device with 12" display)
(Page 156)".
● SIMATIC IPC A CFast card that is approved for industrial use.

Siemens SIMATIC IPC477D Specifications

General

Brand	Siemens
Model	SIMATIC IPC477D
Category	Industrial PC
Language	English